User`s guide
Chapter 13: Thumbnail Generation 211
• Remaining elements: Shows new or updated elements that are not generated.
• Remaining thumbnails for current element: Shows remaining thumbnails to be
generated for the current element. For example if a template has four variants,
the remaining thumbnails will generate all four variants.
• AQ and error status: Shows information about created elements, connection
status, and error messages.
• Status: Displays a progress bar showing the progress status of each generated
thumbnail.
• Connection Status: Displays three indicators showing the connection status
for VCP’s database, Viz Engine and Advanced Queuing messaging queue.
Figure 96: Settings
• SID or TNS-alias: Database hostname and SID or TNS name alias.
• Username: Database username (default:
pilot
).
• Password: Database password (default:
pilot
).
• Hostname: Viz Engine or Viz Multiplexer hostname. Use Viz Multiplexer’s
hostname if it is used as it will forward requests to Viz Engine.
• Port: Set the port number used for communication with Viz Multiplexer or Viz
Engine. Use Viz Multiplexer’s port number if it is used as it forward requests
to Viz Engine.
• Timeout: Set the timeout before TNG should stop waiting for response and
continue requesting thumbnail(s) for the element.
• Thumbnail height: Sets the pixel height for the thumbnail: The width is
automatically calculated based on the aspect of the scene set in the attached
Viz Config.
See Also
• Thumbnail Generation
• To configure Viz Thumbnail Generator