User`s guide

34 Chapter 5: Installation
Figure 5: Newsroom Component configuration
Configuring the preview settings will add the settings to your local machine’s
registry. If you have
multiple newsroom clients it also possible to have all clients
use the preview host settings by adding them to your Database Parameters. If the
latter is required leave the preview settings blank.
11. Configure the NrC, and click Next
• Enter the Viz Engine preview hostname or IP address.
• Enter the port number. If remote preview is used, use port 50008. If local
preview is used, use port 6100.
• To obtain the same preview settings for multiple Newsroom Components
you should also add the same settings to the database.
Note: Multiple renderers can be defined as a comma separated string. For example
<host>, <host>, ... or <host>:<port>,<host>:<port>, ... . If hosts are defined
without a trailing port number, it is recommended to set the default port in the Port
field. If no port number is set, it will default to 6100.
12. Optional: Set Advanced iNEWS settings if needed
13.
Optional : Obtain, and enter, a valid MOS ID from the newsroom system