User`s guide

Chapter 7: Configuration 57
To add a video device
1. Click the Add Video..
. button in the Profile Configuration window to open the
Configure Video Device dialog box.
2. Select the video server Type
3. Enter the Host or IP address and the port
• Default port for MVCP is 5250
• Default port for Viz Engine is 6100
4. Select VME Storage
5. Enable/Disable Fullscreen mode
• When Fullscreen is enabled, which is the default behavior, stand-alone
video clip elements are played out full screen in the back layer. Graphics in
the middle or front layer will still play.
• When Fullscreen is disabled stand-alone video clip elements will only
replace the current video clip without triggering animations or transition
effects.
6. Select Clip Channel (only relevant for Viz Engine)
7. Click OK.
• A status indicator will show if the video device is on-air or online.
To edit a Viz Engine or video device
• Right-click the device and select Edit from the appearing context menu, or
simply double-click it.
To delete a Viz Engine or video device
• Right-click the device and select Delete from the appearing context menu, or
simply select it and press the Delete button.
To add an output to the Channels list
•Simply drag and drop a Viz Engine or video device onto the channel in the
Channels list, or select it and from the appearing context menu select Add to
profile (creating a new channel) or Add to selected channel.