User`s guide

62 Chapter 7: Configuration
To enable local preview
If you are running a Viz Engine locally, you need to install Viz Content Pilot client’s
Preview plugin
• Select the Viz Engine Preview plug-in during Custom installation. In addition a
Viz Engine must be installed on the same machine.
To use local preview
1. From the main menu select Viz Engine > Local Viz Engine Preview, or press
CTRL+P
2. Right-click in the playlist and from the appearing context menu select Auto
Preview (which allows preview to be sent as soon as an item in the list is
selected)
3. Select (by left-click) an item and it will be sent to the preview window
To automatically login to Viz Graphics Hub
1. Start Viz Config
2. In the Database section enable Auto Login
3. Click Save and close Viz Config
See Also
• Working with the Profile Configuration
• Local Viz Preview reference
• Custom installation
• Plugin Installation
• Viz Engine 3.x Administrator’s Guide
7.6.2 Configuring Local Preview of Video Files
If you are previewing proxy versions of video clips from Viz One using Viz Engine
(i.e. Viz Engine installed on your control client machine) you will have to install
Video Codecs that are, for Viz Engine 3.5, not part of the Viz Engine installation.
Note that the setup procedures of Video Codecs are only relevant for Viz Engine
3.5 when used for previewing low resolution versions of video clips stored on Viz
One. In most cases this happens when you are using a control application to for
example preview a full screen clip. Playout of the high resolution versions do not
require this codec.
See Also
• Video Codecs
• Working with the Profile Configuration
• Local Viz Preview reference
• Viz Engine 3.x Administrator’s Guide