Datasheet
2
Pin Description
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
V
E
V
LED
DESAT
V
CC2
V
EE
V
OUT
V
CLAMP
V
EE
V
S
V
CC1
FAULT
V
S
CATHODE
ANODE
ANODE
CATHODE
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
V
E
V
LED
DESAT
V
CC2
V
EE
V
OUT
V
CLAMP
V
EE
V
S
V
CC1
FAULT
V
S
CATHODE
ANODE
ANODE
CATHODE
Pin Symbol Description
1 V
S
Input Ground
2 V
CC1
Positive input supply voltage. (4.5 V to 5.5 V)
3 FAULT Fault output. FAULT changes from a high impedance state
to a logic low output within 5 µs of the voltage on the
DESAT pin exceeding an internal reference voltage of 7 V.
FAULT output is an open collector which allows the FAULT
outputs from all ACPL-332J in a circuit to be connected
together in a “wired OR” forming a single fault bus for inter-
facing directly to the micro-controller.
4 V
S
Input Ground
5 CATHODE Cathode
6 ANODE Anode
7 ANODE Anode
8 CATHODE Cathode
9 V
EE
Output supply voltage.
10 V
CLAMP
Miller clamp
11 V
OUT
Gate drive voltage output
12 V
EE
Output supply voltage.
13 V
CC2
Positive output supply voltage
14 DESAT Desaturation voltage input. When the voltage on DESAT
exceeds an internal reference voltage of 6.5 V while the
IGBT is on, FAULT output is changed from a high impedance
state to a logic low state within 5 µs.
15 V
LED
LED anode. This pin must be left unconnected for guaran-
teed data sheet performance. (For optical coupling testing
only)
16 V
E
Common (IGBT emitter) output supply voltage.
Ordering Information
ACPL-332J is UL Recognized with 3750 Vrms for 1 minute per UL1577.
Part number
Option
Package
Surface
Mount Tape& Reel
IEC/EN/DIN EN
60747-5-2 QuantityRoHS Compliant
ACPL-332J -000E SO-16 X X 45 per tube
-500E
X X X
850 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
ACPL-332J-500E to order product of SO-16 Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN
60747-5-2 Safety Approval in RoHS compliant.
Example 2:
ACPL-332J-000E to order product of SO-16 Surface Mount package in tube packaging with IEC/EN/DIN EN 60747-5-
2 Safety Approval and RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and
RoHS compliant option will use ‘-XXXE‘.