Datasheet

2
Device Selection Guide
Part Number Color and Dominant Wavelength
λ
d
(nm) Typ
[3]
Luminous Intensity Iv (mcd)
[1,2,5]
Viewing Angle
Typ (°)
[4]
Min Max
ALMD-EG3D-VX002 Red 626 4200 9300
30°
ALMD-EL3D-VX002 Amber 590 4200 9300
ALMD-CM3D-Y1002 Green 525 9300 21000
ALMD-CB3D-SU002 Blue 470 1900 4200
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package and it is tested with pulsing condition.
2. The optical axis is closely aligned with the package mechanical axis.
3. Dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4. θ½ is the o-axis angle where the luminous intensity is half the on-axis intensity.
5. Tolerance for each bin limit is ± 15%
Part Numbering System
Packaging Option
02: tested 20mA, 13 inch carrier tape, 8mm pitch, 16mm carrier width
Color Bin Selection
0: Full Distribution
Maximum Intensity Bin
Refer to Device Selection Guide
Minimum Intensity Bin
Refer to Device Selection Guide
Untinted/Tinted Lens
D: Tinted
Viewing Angle
3: 30°
Color
B: Blue
G: Red
L: Amber
M: Green
Package
C: SMT Round Lamp InGaN
E: SMT Round Lamp AlInGaP
SMT Lamps
ALMD – X X 3D – x x x xx