Datasheet

7
Figure 14. Recommended Soldering Land Pattern
Note: Recommended stencil thickness
is 0.1524mm (6 mils) minimum and
above
5.2
2.1
4.0
0.7
Figure 16. Recommended Leaded Reow Soldering Prole Figure 17. Recommended Pb- Free Reow Soldering Prole
Note: For detailed information on reow soldering of Avago Surface Mount LED, refer to Avago Application Note AN1060 Surface Mounting SMT LED
Indicator Components.
240°C MAX.
20 SEC. MAX.
3°C/SEC.
MAX.
120 SEC. MAX.
TIME
TEMPERATURE
183°C
100-150°C
-6°C/SEC.
MAX.
60-150 SEC.
3°C/SEC. MAX.
217 °C
200 °C
60 - 120 SEC.
6 °C/SEC. MAX.
3 °C/SEC. MAX.
3 °C/SEC. MAX.
150 °C
255 - 260 °C
100 SEC. MAX.
10 to 30 SEC.
TIME
TEMPERATURE
Figure 15. Recommended Pick and Place Nozzle Tip (Urethane PAD Tip)
4.8mm
4.4mm
Φ3.9mm
Pick & Place
nozzle
LED ange
Nozzle depth
Note:
1. Nozzle depth should be touching LED ange during pick and place.
2. Nozzle width should be able to t into LED carrier tape