User Guide

User Manual BCM1000-BTW
11/12/04
Broadcom Corporation
Document 1000-BTW-UM400-R Configure Bluetooth Page 15
If, for some reason, the connection must be closed: from My Bluetooth Places, right-click the service name,
and from the shortcut menu, select Disable.
When a HID connection is closed manually by the operator, the connection’s persistence is broken. The
connection must be re-established manually, after which the connection will again persist until broken
manually.
Configure
No configuration is necessary.
Audio Gateway
Overview
The Audio Gateway Application allows a remote Bluetooth device to use this computer’s microphone and
speakers as the remote device’s audio input and output devices.
Create an Audio Gateway Connection
Open a connection to the Audio Gateway service that is provided by another Bluetooth device using one of
these techniques:
• Notification area, at the far right of the taskbar, Bluetooth icon
• From My Bluetooth Places
• Using the Bluetooth Setup wizard
Close an Audio Gateway Connection
If the connection was established from the Bluetooth icon in the Notification area, at the far right of the taskbar;
click the Bluetooth icon, select Quick Connect, Audio Gateway and then select the device that is providing the
service (active connections have a checkmark in front of them).
or
No matter how the connection was created, in My Bluetooth Places, right-click the service name and select
Disconnect.
Configure
The Bluetooth Configuration Panel > Client Applications > Audio Gateway > General tab provides options to
configure:
• The application name - to change it, highlight the existing name and enter the new name.
• Secure connection - to enable secure connection, select the option box. To disable secure connection,
clear the option box.