User Guide

User Manual BCM1000-BTW
11/12/04
Broadcom Corporation
Document 1000-BTW-UM400-R Configure Bluetooth Page 17
Open a connection to the Dial-up Networking service that is provided by another Bluetooth device using one
of these techniques:
• Notification area, at the far right of the taskbar, Bluetooth icon
• From My Bluetooth Places
• Using the Bluetooth Setup Wizard
After the Bluetooth dial-up networking connection is established it can be used the same way as any other
networking connection. For example, you can open a browser and explore the World Wide Web, if the remote
computer has Internet access.
Close a Dial-up Networking Connection
• In My Bluetooth Places, right-click the service name and select Disconnect.
or
• If the connection was established from the Bluetooth icon in the Notification area, at the far right of the
taskbar; click the Bluetooth icon, select Quick Connect, Dial-up Networking and then select the device that
is providing the service (active connections have a checkmark in front of them).
Configure
The Bluetooth Configuration Panel > Client Applications > Dial-up Networking > General tab provides options
to configure:
• The application name - to change it, highlight the existing name and enter the new name.
• Secure connection - to enable secure connection, select the option box. To disable secure connection,
clear the option box.
• The Bluetooth virtual device (modem) to be used.
Fax
Overview
The Bluetooth Fax service allows this computer to send a fax using a Fax/Modem that is physically connected
to a remote device.
To send a Fax:
1. Open a connection to the Fax service that is provided by another Bluetooth device, using one of these
techniques:
• Notification area, at the far right of the taskbar, Bluetooth icon
• From My Bluetooth Places
• Using the Bluetooth Setup Wizard
2. Open or create the document to be faxed, and then select the Print, Send to Fax Recipient or a similar
command that is available in most applications.
Note: Unless you have a specific reason to do so, DO NOT CHANGE the default Bluetooth device
or alter the device's configuration.
Note: The fax application needs to use the Bluetooth Fax Modem.