User Guide

BCM1000-BTW User Manual
11/12/04
Broadcom Corporation
Page 18 Configure Bluetooth Document 1000-BTW-UM400-R
Close a Fax Connection
Fax connections close automatically when the Fax transmission is complete.
Configure
The Bluetooth Configuration Panel > Client Applications > Fax > General tab provides options to configure:
• The application name - to change it, highlight the existing name and enter the new name.
• Secure connection - to enable secure connection, select the option box. To disable secure connection,
clear the option box.
Headset
Overview
The Headset application allows this computer to use a Bluetooth headset (or any other device that offers the
Bluetooth headset service) as the audio input and output device for this computer.
Possible uses include:
• If this computer has on-board telephone hardware, a Bluetooth headset might be used as the audio input/
output device to make/receive telephone calls.
• If this computer has voice recognition capabilities, a Bluetooth headset might be used as the audio input
device.
• If this computer has high quality audio capabilities, a Bluetooth stereo headset might be used to listen to
the output.
• Any other scenario that requires audio input/output can potentially take advantage of a Bluetooth headset
to replace a hardwired microphone and/or speakers.
Create a Headset Connection
Establish a connection using one of these techniques:
• Notification area, at the far right of the taskbar, Bluetooth icon.
• From My Bluetooth Places.
• Using the Bluetooth Setup Wizard.
Close a Headset Connection
• In My Bluetooth Places, right-click the service name and select Disconnect.
or
• If the connection was established from the Bluetooth icon in the notification area, at the far right of the
taskbar: click the Bluetooth icon, select Quick Connect, Headset and then select the device that is
providing the service (active connections have a checkmark in front of them).
Note: This topic also applies to high quality audio.
Note: Most Bluetooth headsets ring when a connection is attempted; answer the ring to complete the
connection and begin using the headset as the audio input/output device for this computer.