User's Manual
How Do I Determine the Bluetooth Device Address (BDA) of My
Hardware Device?
1. In Bluetooth Configuration, click the Hardware tab.
2. From the Devices list, click the name of the device for which you want to determine the address. The BDA is
shown opposite Device Address under Device Properties.
How Do I Determine the Version of the Host Controller Interface (HCI)?
1. In Bluetooth Configuration, click the Hardware tab.
2. From the Devices list, click the name of the device for which you want to determine the HCI version. The HCI
version is shown opposite HCI Version under Device Properties. The HCI revision is listed opposite HCI
Revision.
How Do I find Information about the Bluetooth Hardware Attached to
My Computer?
In Bluetooth Configuration, click the Hardware tab.
How Do I Test a Wireless Network Access Connection on This
Computer?
If this computer is hardwired to the LAN, unplug the hardwired connection to ensure that the test checks the wireless
connection rather than the hardwired connection. If the network server has access to the Internet, open a browser on this
computer and connect to the World Wide Web. You may also ping the server from the command line.
Why Do I Get an Unknown Port Message When I Try to Use a Bluetooth
Serial Port?
The Unknown Port error message usually means an attempt was made to connect a port that was in use. Additional
Bluetooth serial ports can be added.
Back to top
Review Copy