User's Manual

NOTES:
1. Some HIDs have multiple modes. Before establishing a connection, be sure that the HID is in the desired
mode. For example, in the case of an HID that can function as both a mouse and a laser pointer, be sure the
mode switch is set to Mouse before attempting to connect.
2. The HID connection persists after the initial HID connection is established, If the computer is restarted or shut
down and turned on again, the connection is automatically reestablished.
3. HIDs usually have a button (the button is sometimes difficult to find) that must be pressed before other
Bluetooth devices can locate the HID. Even after the button is pressed, the HID can only be discovered for a
limited time, and then the button must be pressed again. The time period can be as short as 30 seconds or as
long as 180 seconds. Be sure to read the documentation that accompanies the HID before you attempt to
connect to the device.
4. Under normal circumstances, there is no reason to close an HID connection. If, for some reason, the
connection must be closed, open My Bluetooth Places, right-click the service name, and click Disconnect.
When an HID connection is closed manually in this way, the persistence of the connection is broken. To
reestablish a persistent connection, reestablish the connection.
Network Access
To make a network connection to a remote device or to a Local Area Network (LAN) using the network
connection of the remote device
1. From this computer, click (or double-click, as necessary) Bluetooth Setup Wizard.
2. Click I know the service I want to use and I want to find a Bluetooth device that provides that service, and
then click Next.
3. Click Network Access in the Bluetooth Service Selection list, and then click Next.
4. In Bluetooth Device Selection, click the name of the device you want to connect with, and then click Next.
5. Respond to the Bluetooth PIN Code Required message and Bluetooth PIN Code Request that appear on
both this computer and the remote device (see
Responding to a Bluetooth PIN Code Request).
To disconnect the network connection
1. From this computer, click Search for devices in range.
2. Right-click the device you established a network connection with and click Disconnect Network Access.
PIM Item Transfer
NOTE: The selected Received Business Cards option does not influence the settings on other PIM-related
property pages.
To exchange electronic business cards with a remote device and to send other Personal Information Manager
(PIM) items such as calendar items, contacts, notes, and messages to the remote device
1. From this computer, click (or double-click, as necessary) Bluetooth Setup Wizard.
2. Click I know the service I want to use and I want to find a Bluetooth device that provides that service, and
then click Next.
3. Click PIM Item Transfer in the Bluetooth Service Selection list, and then click Next.
4. In Bluetooth Device Selection, click the name of the device you want to connect with, and then click Next.
5. Click Finish.
Review Copy