Installation Instruction

12 Installation Guide

German

4. Connect the 2 antenna cables to the Mini PCI card. The gray

(aux) cable connects to the antenna connector closest to the

edge of the Mini PCI card, and the black (main) cable

connects to the antenna connector closer to the center of

the card, as shown in the following illustration.

When connecting the antenna cables, be sure to connect the

cables straight down and press firmly until they are fully

seated. If antenna cable is inserted into connector at an angle,

the center pin of the antenna connector could be damaged.

5. To complete the procedure, reverse the steps in the “Before

You Begin” section.

✎

Be careful not to pinch the cables or damage the

connectors. This could reduce wireless performance or

cause the Mini PCI device to function improperly. Tuck

any excess cable inside the system enclosure.

348376-B22.book Page 12 Friday, June 25, 2004 8:35 AM