User's Manual

Security
Hardware and Software Guide 9–13
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
hp CONFIDENTIAL
August 24, 2004 4:02 pm
Changing DriveLock Passwords
Ä
CAUTION: To prevent loss of work and damage to the tablet PC and
the hard drive, shut down the tablet PC before inserting or removing a
hard drive. (The hard drive is any hard drive used in the hard drive bay.)
To access the DriveLock settings in Computer Setup:
1. Shut down the tablet PC. If you are not sure whether the
tablet PC is off or in Hibernation, turn the tablet PC on by
pressing the power/standby switch to the left or right, and
then shut down the tablet PC through the operating system.
2. Be sure that the hard drive is inserted into the tablet PC (not
into an optional docking device or external MultiBay).
3. Open Computer Setup by turning on (not restarting) the tablet
PC. Press
f10 while the F10 = ROM Based Setup message is
displayed in the lower left of the screen.
❏ To change the language, press f2.
❏ For navigation instructions, press f1.
4. Use the arrow keys to select the Security menu > DriveLock
passwords, and then press
enter.
5. Use the arrow keys to select the location of the hard drive,
and then press
f10.
6. Use the arrow keys to select the field for the password you
want to change, type your current password in the Old
Password field, type the new password in the New Password
and in the Verify New Password fields. Then press
f10.
7. To save your preferences, use arrow keys to select File >
Save Changes and Exit, and then follow the instructions on
the screen.
Your preferences are set when you exit Computer Setup and
take effect when the tablet PC restarts.