User's Manual

9–14 Hardware and Software Guide
Security
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
hp CONFIDENTIAL
August 24, 2004 4:02 pm
Removing DriveLock Protection
To access the DriveLock settings in Computer Setup:
1. Shut down the tablet PC. If you are not sure whether the
tablet PC is off or in Hibernation, turn the tablet PC on by
pressing the power/standby switch to the left or right, and
then shut down the tablet PC through the operating system.
2. Be sure that the hard drive is inserted into the tablet PC (not
into an optional docking device or external MultiBay).
3. Open Computer Setup by turning on (not restarting) the tablet
PC. Press
f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏ To change the language, press f2.
❏ For navigation instructions, press f1.
4. Use the arrow keys to select the Security menu > DriveLock
passwords, and then press
enter.
5. Use the arrow keys to select the location of the hard drive,
and then press
f10.
6. Toggle the Protection field to Disable, and then press f10.
7. Type your master password in the Old Password field. Then
press
f10.
8. To save your preferences, use arrow keys to select File >
Save Changes and Exit. Then follow the instructions on the
screen.
Your preferences are set when you exit Computer Setup and
take effect when the tablet PC restarts.