User's Manual

2–8 Hardware and Software Guide
Power
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
hp CONFIDENTIAL
August 24, 2004 4:01 pm
Using the Default Power Settings
The following tables describe the factory power settings on the
tablet PC. You can change many of these settings according to
your preference. For more information on changing power
settings, refer to the “Managing Power Options” section in this
chapter.
Turning the Tablet PC or Display On or Off
Task Procedure Result
Turn on the
tablet PC.
Slide the power/standby switch
to the left.
■ The power light and
the power/standby
light are turned on.
■ The operating
system loads.
Shut down the
tablet PC.*
Save your work and close all
open applications. Then
■ Slide the power/standby
switch to the left and follow
the on-screen directions (if
displayed) for shutting
down the tablet PC.
■ Shut down the tablet PC
through the operating
system. Select Start >
Shut Down> Shut Down
> OK.
■ The power light and
power/standby light
are turned off.
■ The operating
system shuts
down.
■ The tablet PC is
turned off.
Turn off the
display while the
power is on.
Close the tablet PC. Closing the tablet PC
activates the display
switch, which turns off
the display. This
conserves battery
power.
* If the system is unresponsive and you are unable to shut down the tablet PC
with these procedures, refer to the “Using Emergency Shutdown Procedures”
section in this chapter.