User's Manual

Pen and Command Controls
Hardware and Software Guide 4–11
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
hp CONFIDENTIAL
August 24, 2004 4:01 pm
Setting Command Control Preferences
All command controls except the Display Toggle button and the
enter function of the jog dial can be customized to launch
applications, simulate key combinations, or perform preset
system functions.
Each programmable command control can be assigned to
4 settings. Each setting applies only to 1 of 4 views:
■ Portrait-Primary
■ Portrait-Secondary
■ Landscape-Primary
■ Landscape-Secondary
Command control preferences are set in the Tablet and Pen
Settings window. You must select a view before setting a
preference. Each view is illustrated in the Button Location pane
of the Tablet and Pen Settings window as you select it.
If you are unfamiliar with the four views, you may want to read
“Selecting a View” next in this section, before setting a command
control preference.
Selecting a View
In the Portrait-Primary and Portrait-Secondary views, the image
is displayed vertically, in portrait orientation. In the Landscape-
Primary and Landscape-Secondary views, the image is displayed
horizontally, in landscape orientation.
■ A portrait view is often optimal when you are using the
tablet PC as a handheld.
■ A landscape view is often optimal when you are displaying
the image on an optional external monitor or projector.