User's Manual

Pen and Command Controls
Hardware and Software Guide 4–13
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
hp CONFIDENTIAL
August 24, 2004 4:01 pm
Assigning or Changing a Preference
To assign or change the function of a programmable command
control:
1. Select Start > Control Panel > Printers and Other
Hardware > Tablet and Pen Settings > Tablet Buttons tab.
2. In the Button Settings For field, select the view in which you
want to use your preference. (The view is illustrated in the
Button Location panel.)
3. In the Tablet Button drop-down list, select the button you
plan to assign.
❏ To assign or change the function of rotating the jog dial
upward, select Up.
❏ To assign or change the function of rotating the jog dial
downward, select Down.
4. Select Change. (The Button Action dialog box opens.)
5. Select your preference in the Button Action dialog box.
To save your preference, select OK or Apply.
Returning All Command Controls to Default Settings
To return the settings on all command controls to their default
settings:
1. Select Start > Control Panel > Printers and Other
Hardware > Tablet and Pen Settings > Tablet Buttons tab.
2. In the Button Settings For field, select the view in which you
want to change all command controls to their default settings.
3. Select Reset. (All command controls are returned to their
default settings only in the orientation currently selected.)
4. Select Apply, and then select OK.