User's Manual Part 3

Pointing Devices and Keyboard
Hardware and Software Guide 3–7
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
hp CONFIDENTIAL
August 24, 2004 4:01 pm
Switching Displays (fn+f4)
The fn+f4 hotkey switches the image among display devices
connected to the external monitor connector or the S-Video jack
on the tablet PC. For example, if an external monitor is connected
to the tablet PC, pressing the
fn+f4 hotkey multiple times toggles
the image between the tablet PC display, the external monitor
display, and a simultaneous display on both the tablet PC and the
monitor.
Most external monitors receive video information from the tablet
PC using the external VGA video standard. The
fn+f4 hotkey can
also toggle images among other devices receiving video
information from the tablet PC.
The following five video transmission types, with examples of
devices that use them, are supported by the
fn+f4 hotkey:
■ LCD (tablet PC display)
■ External VGA (most external monitors)
■ S-Video (televisions, camcorders, VCRs, and video capture
boards with S-Video in jacks)
■ Composite video (televisions, camcorders, VCRs, and video
capture boards with composite-video in jacks)
■ DVI-D (external monitors that support the DVI-D interface)
✎
DVI-D can be connected to the tablet PC only when the notebook
is docked in an optional docking device.
Viewing Battery Charge Information (fn+f8)
Press fn+f8 to display charge information for all installed battery
packs. The display indicates which battery packs are charging and
reports the amount of charge remaining in each battery pack.
Battery pack locations are indicated by number:
■ Location 1 is the primary battery pack.
■ Location 2 is the travel battery pack.
367426-xx1.book Page 7 Tuesday, August 24, 2004 4:02 PM