User's Manual Part 4

5–8 Hardware and Software Guide
Multimedia
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
hp CONFIDENTIAL
August 10, 2004 12:25 pm
Installing Software
To install software from a CD that is included with the tablet PC:
1. Insert an appropriate optical drive into an external MultiBay
or MultiBay II.
2. Connect the tablet PC to a reliable AC outlet.
3. Close any open applications.
4. Insert a software CD into the optical drive.
❏ If Autorun is enabled, an installation wizard is displayed.
❏ If Autorun is disabled, select Start > Run. Enter:
x:\setup.exe
(where x is your CD drive designation), and then select
OK.
5. When the installation wizard is displayed, follow the
installation instructions on the screen.
6. Restart the tablet PC if prompted.
✎
Repeat the installation procedure for all software you want to
install.
✎
WinDVD Creator has special drive requirements for proper
installation. To install WinDVD Creator, refer to the instructions
provided with the InterVideo WinDVD Creator CD.
367426-xx1.book Page 8 Tuesday, August 24, 2004 4:02 PM