User's Manual Part 6

10–6 Hardware and Software Guide
MultiBoot
DRAFT Revised: 8/24/04
File: Chap10.fm
PN: HP-367186-001
hp CONFIDENTIAL
August 24, 2004 4:02 pm
Setting a MultiBoot Express Prompt
To set the tablet PC to display the MultiBoot startup location
menu each time the tablet PC is started or restarted with
Computer Setup:
1. Open Computer Setup by turning on or restarting the tablet
PC. Press
f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏ To change the language, press f2.
❏
For navigation instructions, press f1.
2. Use the arrow keys to select Advanced > Boot options, and
then press
enter.
3. In the Express Boot Popup Delay (Sec) field, select the length
of time in seconds that you want the tablet PC to display the
startup location menu before it defaults to the current
MultiBoot setting (when 0 is selected, the Express Boot
startup location menu is not displayed.)
4. Save your preferences and exit Computer Setup by using the
arrow keys to select File > Save changes and exit, and then
follow the instructions on the screen.
Your preferences are set when you exit Computer Setup, and
they take effect when the tablet PC restarts.
367426-xx1.book Page 6 Tuesday, August 24, 2004 4:02 PM