User's Manual

140 Adding and Replacing Parts
b Connect the battery cable to the connector on the system board.
6 Replace the keyboard.
7 Replace the hinge cover.
Optical Drive
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1 Follow the procedures in "Before You Begin" on page 123.
2 Turn the computer over.
3 Remove the optical-drive security screw.
4 Insert a scribe into the notch and push it to the side to release the drive
from the bay.
5 Slide the drive out of the bay.
1 notch 2 optical-drive security screw 3 optical drive
2
3
1