User Manual
Table Of Contents
- Congratulations, you and your MacBookPro were made for each other.
- Contents
- 1 Ready, Set Up, Go
- 2 Life with Your MacBookPro
- 3 Boost Your MacBookPro
- 4 Problem, Meet Solution
- Problems That Prevent You from Using Your MacBookPro
- Using Apple Hardware Test
- Problems with Your Internet Connection
- Problems with AirPort Extreme Wireless Communication
- Keeping Your Software Up to Date
- Reinstalling the Software That Came with Your MacBookPro
- Learning More, Service, and Support
- Locating Your Product Serial Number
- 5 Last, but Not Least
- Regulatory Compliance Information
- Index
Chapter 3 Boost Your MacBook Pro 41
6 Hold the drive by its sides while you gently pull the connector on the left side of the
drive to disconnect it.
The connector is attached to a cable and remains in the hard disk drive bay.
Important: There are four (4) mounting screws on the sides of your hard disk drive.
If your replacement drive doesn’t include mounting screws, remove the ones from your
old drive and mount them on the replacement drive before you install it.
7 Attach the connector to the left side of the replacement drive.
Mounting screws