User Manual
Table Of Contents
- Congratulations, you and your MacBookPro were made for each other.
- Contents
- 1 Ready, Set Up, Go
- 2 Life with Your MacBookPro
- 3 Boost Your MacBookPro
- 4 Problem, Meet Solution
- Problems That Prevent You from Using Your MacBookPro
- Using Apple Hardware Test
- Problems with Your Internet Connection
- Problems with AirPort Extreme Wireless Communication
- Keeping Your Software Up to Date
- Reinstalling the Software That Came with Your MacBookPro
- Learning More, Service, and Support
- Locating Your Product Serial Number
- 5 Last, but Not Least
- Regulatory Compliance Information
- Index
46 Chapter 3 Boost Your MacBook Pro
3 Hold the memory module by its notches and remove it from the slot.
4 Remove the other memory module.
Important: Hold the memory modules by their edges, and do not touch the gold
connectors.
5 Insert the new memory module in the slot:
a Align the notch on the gold edge of the module with the notch in the lower memory
slot.
b Tilt the card and push the memory into the slot.
c Use two fingers with firm, even pressure to push down on the memory module.
You should hear a click when the memory is inserted correctly.
d Repeat to install an additional memory module in the top slot. Press down on the
module to make sure it is level.