User Manual
Table Of Contents
- Congratulations, you and your MacBookPro were made for each other.
- Contents
- 1 Ready, Set Up, Go
- What’s in the Box
- Setting Up Your MacBookPro
- Step1: Plug In the 85W MagSafe Power Adapter to provide power to the MacBookPro and charge th...
- Step2: Connect to a wireless or wired network.
- Step3: Press the power (®) button briefly to turn on your MacBookPro.
- Step4: Configure your MacBookPro with Setup Assistant.
- Migrating Information to Your MacBookPro
- Step5: Customize the MacOSX desktop and set preferences.
- Putting Your MacBookPro to Sleep or Shutting It Down
- 2 Life with Your MacBookPro
- 3 Boost Your MacBookPro
- 4 Problem, Meet Solution
- Problems That Prevent You from Using Your MacBookPro
- Using Apple Hardware Test
- Problems with Your Internet Connection
- Problems with AirPort Extreme Wireless Communication
- Keeping Your Software Up to Date
- Reinstalling the Software That Came with Your MacBookPro
- Learning More, Service, and Support
- Locating Your Product Serial Number
- 5 Last, but Not Least
- Regulatory Compliance Information
- Index
42 Chapter 3 Boost Your MacBook Pro
Important: There are four (4) mounting screws on the sides of your hard disk drive.
If your replacement drive doesn’t include mounting screws, remove the ones from your
old drive and mount them on the replacement drive before you install it.
7 Attach the connector to the right side of the replacement drive.
Mounting screws