User Manual
Table Of Contents
- Congratulations, you and your MacBookPro were made for each other.
- Contents
- 1 Ready, Set Up, Go
- What’s in the Box
- Setting Up Your MacBookPro
- Step1: Plug In the 85W MagSafe Power Adapter to provide power to the MacBookPro and charge th...
- Step2: Connect to a wireless or wired network.
- Step3: Press the power (®) button briefly to turn on your MacBookPro.
- Step4: Configure your MacBookPro with Setup Assistant.
- Migrating Information to Your MacBookPro
- Step5: Customize the MacOSX desktop and set preferences.
- Putting Your MacBookPro to Sleep or Shutting It Down
- 2 Life with Your MacBookPro
- 3 Boost Your MacBookPro
- 4 Problem, Meet Solution
- Problems That Prevent You from Using Your MacBookPro
- Using Apple Hardware Test
- Problems with Your Internet Connection
- Problems with AirPort Extreme Wireless Communication
- Keeping Your Software Up to Date
- Reinstalling the Software That Came with Your MacBookPro
- Learning More, Service, and Support
- Locating Your Product Serial Number
- 5 Last, but Not Least
- Regulatory Compliance Information
- Index
Chapter 3 Boost Your MacBook Pro 45
For information about installing Mac OS X and bundled applications, see “Reinstalling
the Software That Came with Your MacBook Pro” on page 62.
Installing Additional Memory
Your computer has two memory slots that you access by removing the bottom case.
Your MacBook Pro comes with a minimum of 4 gigabytes (GB) of 1066 MHz Double
Data Rate (DDR3) Synchronous Dynamic Random-Access Memory (SDRAM) installed.
Each memory slot can accept an SDRAM module that meets the following
specifications:
 Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
 30 mm (1.18 inches)
 204-pin
 2 GB or 4 GB
 PC3-8500 DDR3 SO-DIMM 1066 MHz Type RAM
You can add two 4 GB memory modules for a maximum of 8 GB of memory. For best
performance, fill both memory slots and install an identical memory module in each
slot.
To install memory in your MacBook Pro:
1 Follow steps 1 through 3 beginning on page 37.
Important: When you remove the bottom case, you expose sensitive internal
components. Avoid touching anything other than the memory assembly when you
remove or add memory.