User Manual
Table Of Contents
- Congratulations, you and your MacBookPro were made for each other.
- Contents
- 1 Ready, Set Up, Go
- What’s in the Box
- Setting Up Your MacBookPro
- Step1: Plug In the 85W MagSafe Power Adapter to provide power to the MacBookPro and charge th...
- Step2: Connect to a wireless or wired network.
- Step3: Press the power (®) button briefly to turn on your MacBookPro.
- Step4: Configure your MacBookPro with Setup Assistant.
- Migrating Information to Your MacBookPro
- Step5: Customize the MacOSX desktop and set preferences.
- Putting Your MacBookPro to Sleep or Shutting It Down
- 2 Life with Your MacBookPro
- 3 Boost Your MacBookPro
- 4 Problem, Meet Solution
- Problems That Prevent You from Using Your MacBookPro
- Using Apple Hardware Test
- Problems with Your Internet Connection
- Problems with AirPort Extreme Wireless Communication
- Keeping Your Software Up to Date
- Reinstalling the Software That Came with Your MacBookPro
- Learning More, Service, and Support
- Locating Your Product Serial Number
- 5 Last, but Not Least
- Regulatory Compliance Information
- Index
Chapter 3 Boost Your MacBook Pro 47
5 Insert the new memory module in the slot:
a Align the notch on the gold edge of the module with the notch in the lower memory
slot.
b Tilt the card and push the memory into the slot.
c Use two fingers with firm, even pressure to push down on the memory module.
You should hear a click when the memory is inserted correctly.
d Repeat to install an additional memory module in the top slot. Press down on the
module to make sure it is level.