User's Manual
Table Of Contents
- Starting right
- Getting to know your computer
- Connecting to a network
- Enjoying entertainment features
- Navigating using the keyboard, touch gestures and pointing devices
- Managing power
- Initiating Sleep and Hibernation
- Setting password protection on wakeup
- Using the power meter and power settings
- Running on battery power
- Running on external AC power
- Shutting down (turning off) the computer
- Managing and sharing information
- Maintaining your computer
- Securing your computer and information
- Using Setup Utility (BIOS) and System Diagnostics
- Backing up, restoring, and recovering
- Specifications
- Electrostatic Discharge
- Index
Inserting and removing a memory card
To insert a memory card:
CAUTION: To reduce the risk of damage to the memory card connectors, use minimal force to insert
a memory card.
1. Hold the card label-side up, with the connectors facing the computer.
2.
Insert the card into the memory card reader, and then press in on the card until it is firmly seated.
A sound indicates that the device has been detected.
To remove a memory card:
CAUTION: To reduce the risk of loss of data or an unresponsive system, use the following procedure
to safely remove the memory card.
1. Save your information and close all programs associated with the memory card.
2. From the Windows desktop, tap or click the remove hardware icon in the notification area, at the
far right of the taskbar. Then, follow the on-screen instructions.
3. Press in on the card (1), and then remove it from the slot (2).
NOTE: If the card is not ejected, pull the card out of the slot.
ENWW
Inserting and removing a memory card
55