Datasheet
11
Package Characteristics
Parameter Sym. Device Min. Typ.* Max. Units Test Conditions Fig. Note
Input-Output V
ISO
3750 V rms RH < 50%, 3, 10
Momentary With- t = 1 min.,
stand Voltage**
Resistance R
I-O
10
12
Ω RH ≤45% 3
(Input-Output) V
I-O
= 500 Vdc,
t = 5 s
Capacitance C
I-O
0.6 pF f = 1 MHz, 12
(Input-Output) T
A
= 25°C
Input-Input I
I-I
0.005 µA RH ≤45%, 4
Insulation t = 5 s,
Leakage Current V
I-I
= 500 Vdc
Resistance R
I-I
10
11
Ω 4
(Input-Input)
Capacitance C
I-I
HCPL-2530/ 0.03 pF f = 1 MHz 4
(Input-Input) 2531/4534
HCPL-0530/ 0.25
0531/0534
*All typicals at T
A
= 25°C.
**The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous voltage
rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table (if applicable), your equipment level
safety specification or Avago Application Note 1074 entitled “Optocoupler Input-Output Endurance Voltage,” publication number 5963-2203E.
HCPL-2530/
2531/4534
Option 020
3, 115000
Device
Parameter Sym. HCPL- Min. Typ.* Max. Units Test Conditions Fig. Note
Propagation t
PHL
2530/0530 0.2 1.5 µsT
A
= 25°CR
L
= 4.1 kΩ 5, 9, 6, 7
Delay Time 2.0 11
to Logic Low 2531/0531/ 0.2 0.8 T
A
= 25°CR
L
= 1.9 kΩ
at Output 4534/0534 1.0
Propagation t
PLH
2530/0530 1.3 1.5 µsT
A
= 25°CR
L
= 4.1 kΩ 5, 9, 6, 7
Delay Time 2.0 11
High to Logic 2531/0531/ 0.6 0.8 T
A
= 25°CR
L
= 1.9 kΩ
at Output 4534/0534 1.0
Common |CM
H
| 2530/0530 1 10 kV/µsR
L
= 4.1 kΩ I
F
= 0 mA, 10 5, 6,
Mode Transient 2531/0531 1 10 R
L
= 1.9 kΩ T
A
= 25°C, 7
Immunity at 4534/0534 15 30 R
L
= 1.9 kΩ V
CM
= 10 V
p-p
Logic High
Level Output
Common |CM
L
| 2530/0530 1 10 kV/µsR
L
= 4.1 kΩ I
F
= 0 mA, 10 5, 6,
Mode Transient 2531/0531 1 10 R
L
= 1.9 kΩ T
A
= 25°C, 7
Immunity at 4534/0534 15 30 R
L
= 1.9 kΩ V
CM
= 10 V
p-p
Logic Low
Level Output
Bandwidth BW 3 MHz R
L
= 100 kΩ 7, 8
*All typicals at T
A
= 25°C.
Switching Specifications (AC)
Over recommended temperature (T
A
= 0°C to 70°C), V
CC
= 5 V, I
F
= 16 mA unless otherwise specified.