Datasheet

2
The SO-8 does not require
“through holes” in a PCB. This
package occupies approximately
one-third the footprint area of the
standard dual-in-line package.
The lead profile is designed to be
compatible with standard surface
mount processes.
The HCPL-2530/0530 is for use in
TTL/CMOS, TTL/LSTTL or wide
bandwidth analog applications.
Current transfer ratio (CTR) for
the HCPL-2530/0530 is 7%
minimum at I
F
= 16 mA.
The HCPL-2531/0531 is designed
for high speed TTL/TTL
applications. A standard 16 mA
TTL sink current through the
input LED will provide enough
output current for 1 TTL load and
Selection Guide
Widebody
Minimum CMR 8-pin DIP (300 Mil) Small-Outline SO-8 (400 Mil) Hermetic
Current Dual Single Dual Single Single Single and
dV/dt V
CM
Transfer Channel Channel Channel Channel Channel Dual Channel
(V/µs) (V) Ratio (%) Package Package* Package Package* Package* Packages*
1,000 10 7 HCPL-2530 6N135 HCPL-0530 HCPL-0500 HCNW135
19 HCPL-2531 6N136 HCPL-0531 HCPL-0501 HCNW136
HCPL-4502 HCPL-0452 HCNW4502
15,000 1500 19 HCPL-4534 HCPL-4503 HCPL-0534 HCPL-0453 HCNW4503
1,000 10 9 HCPL-55XX
HCPL-65XX
4N55
*Technical data for these products are on separate Avago publications.
a 5.6 kΩ pull-up resistor. CTR of
the HCPL-2531/0531 is 19%
minimum at I
F
= 16 mA.
The HCPL-4534/0534 is an HCPL-
2531/0531 with increased
common mode transient
immunity of 15,000 V/µs
minimum at V
CM
= 1500 V
guaranteed.