Datasheet
8
Intensity Bin Limits (mcd)
Green
IV Bin Category Min. Max.
M 5.401 8.6
N 8.601 13.7
P 13.701 21.8
Tolerance: ±15%
Yellow
IV Bin Category Min. Max.
N 8.601 13.7
P 13.701 21.80
Q 21.801 34.7
Tolerance: ±15%
SMT Soldering Prole
Pb free reow soldering Prole
Notes:
Number of reow process shall be less than 2 times and cooling process
to normal temperature is required between the rst and than second
soldering process.
3.00
1.9 x 4 = 7.6
15.00
1.65
Red
IV Bin Category Min. Max.
N 8.601 13.7
P 13.701 21.80
Q 21.801 34.7
Tolerance: ±15%
Orange
IV Bin Category Min. Max.
N 8.601 13.7
P 13.701 21.80
Q 21.801 34.7
R 34.701 55.2
Tolerance: ±15%
Note:
1. Bin categories are established for classication of products. Products
may not be available in all categories. Please contact your Avago
representative for information on currently available bins.
Recommended soldering pattern (unit: mm)
217 °C
200 °C
60 - 120 SEC.
6 °C/SEC. MAX.
150 °C
255 - 260 °C
100 SEC. MAX.
(Acc. to J-STD-020C)
10 to 30 SEC.
TIME
TEMPERATURE
3 °C/SEC. MAX.
3 °C/SEC. MAX.