Datasheet

ManualsBrandsBROADCOM ManualsDisplaysSeven-segment display Green 10 mm 2.1 V No. of digits: 1

HDSM-431x/433x

0.39” (10.0mm) Single digit surface mount LED display

Datasheet

Description

This is 0.39” (10.0mm) height single digit display. This

device utilizes AlInGaP / GaAs chips.This device is with

top surface gray and white segments.

Features

• 0.39” digit height

• Low current operation

• Excellent characters appearance

• Available in CA and CC

• 1000 pieces per reel

• Moisture Sensitivity Level: Level 4

• RoHS compliant

Package Dimensions

Ordering Information

Red Green Yellow Orange Description

HDSM-431C HDSM-431H HDSM-431F HDSM-431L Common Anode, Right Hand Decimal

HDSM-433C HDSM-433H HDSM-433F HDSM-433L Common Cathode, Right Hand Decimal

Note:

1. All dimensions are in millimeters.

2. Tolerance are +/- 0.25mm unless otherwise specied.

Summary of content (9 pages)

PAGE 1
HDSM-431x/433x 0.39” (10.0mm) Single digit surface mount LED display Datasheet Description Features This is 0.39” (10.0mm) height single digit display. This device utilizes AlInGaP / GaAs chips.This device is with top surface gray and white segments. • 0.
PAGE 2
Pin Connection (Common Anode) Pin Connection (Common Cathode) PIN No Connection PIN No Connection 1 Cathode E 1 Anode E 2 Cathode D 2 Anode D 3 Common Anode 3 Common Cathode 4 Cathode C 4 Anode C 5 Cathode DP 5 Anode DP 6 Cathode B 6 Anode B 7 Cathode A 7 Anode A 8 Common Anode 8 Common Cathode 9 Cathode F 9 Anode F 10 Cathode G 10 Anode G Internal Circuit Diagram (Common Anode) Internal Circuit Diagram (Common Cathode) 3.8 A B 7 C 6 D 4 3.
PAGE 3
Electrical / Optical Characteristics @ TA=25°C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 5.4 9 - Mcd IF = 10mA Emissions Wavelength lp/ld - 572/571 - Nm IF = 20mA Spectral Line Half-Width Dl - 20 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.
PAGE 4
Typical Electrical / Optical characteristic curves @ TA=25�� °C Green G 4 Relative Luminous Intensity (Normalized to 1 at 10mA) Relative Luminous Intensity 1.0 0.5 3 2 1 0 0 400 450 500 550 600 650 G 700 0 5 10 Wavelength(nm) Forward Current IF(mA) 40 30 25 30 35 40 45 50 Figure 2. Relative Luminous Intensity vs. Forward Current 40 Forward Current IF(mA) 20 Forward Current IF(mA) Figure 1. Relative Luminous Intensity vs. Wavelength .
PAGE 5
Yellow 4 Relative Intensity (Normalized to 1 at 10mA) Relative Intensity 1.0 0.5 3 2 1 0 0 400 450 500 550 600 650 700 0 5 10 Wavelength(nm) 30 35 40 45 50 40 40 30 30 Forward Current IF(mA) Forward Current IF(mA) Forward Current IF(mA) Forward Current IF(mA) 25 Figure 2. Relative Intensity vs. Forward Current 40 40 20 20 10 10 0 0 10 20 10 20 30 30 40 50 60 70 80 40 50 60 70 80 Ambient Temperature(°C) Ambient Temperature(°C) 90 100 90 100 Figure 3.
PAGE 6
Red R 4 Relative Luminous Intensity (Normalized to 1 at 10mA) Relative Luminous Intensity 1.0 0.5 0 3 2 1 0 400 450 500 550 600 650 700 R 0 5 10 Wavelength(nm) 40 Forward Current IF(mA) Forward Current IF(mA) 25 30 35 40 45 50 Figure 2. Relative Luminous Intensity vs. Forward Current 40 R 20 10 R 30 20 10 0 0 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature(°C) Figure 3. Allowable DC Current vs. Ambient Temperature 20 Forward Current IF(mA) Figure 1.
PAGE 7
Orange 4 Relative Intensity (Normalized to 1 at 10mA) Relative Intensity 1.0 0.5 3 2 1 0 0 450 500 550 600 650 700 750 0 5 10 Wavelength(nm) 25 30 35 40 45 50 Figure 2. Relative Intensity vs. Forward Current 40 40 Forward Current IF(mA) Forward Current IF(mA) 20 Forward Current IF(mA) Figure 1. Relative Intensity vs. Wavelength 30 20 10 30 20 10 0 0 0 10 20 30 40 50 60 70 80 Ambient Temperature(°C) Figure 3. Allowable DC Current vs.
PAGE 8
Intensity Bin Limits (mcd) Green Red IV Bin Category Min. Max. IV Bin Category Min. Max. M 5.401 8.6 N 8.601 13.7 N 8.601 13.7 P 13.701 21.80 P 13.701 21.8 Q 21.801 34.7 Tolerance: ±15% Tolerance: ±15% Yellow Orange IV Bin Category Min. Max. IV Bin Category Min. Max. N 8.601 13.7 N 8.601 13.7 P 13.701 21.80 P 13.701 21.80 Q 21.801 34.7 Q 21.801 34.7 R 34.701 55.2 Tolerance: ±15% Tolerance: ±15% Note: 1.
PAGE 9
Tape specification (unit: mm) For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2008 Avago Technologies. All rights reserved.