Datasheet

ManualsBrandsBROADCOM ManualsDisplaysSeven-segment display Red 14.22 mm 2 V No. of digits: 2

Package Dimensions

HDSM-541x/543x

0.56” (14.22mm)

Dual digit surface mount LED display

Data Sheet

Description

The HDSM-541x/543x is a dual digit display of 0.56”

(14.22mm) height. This device utilizes AlInGaP / GaAs

chips and has a grey top surface with white segments.

Features

x 0.56” digit height

x Low current operation

x Excellent characters appearance

x Available in CA and CC

x 500 pieces per reel

x Moisture sensitivity level: Level 3

x RoHS compliant

Ordering Information

Red Green Yellow Orange Description

HDSM-541C HDSM-541H HDSM-541F HDSM-541L Common Anode, Right Hand Decimal

HDSM-543C HDSM-543H HDSM-543F HDSM-543L Common Cathode, Right Hand Decimal

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance are 0.25 mm (0.01”) unless otherwise noted.

Summary of content (9 pages)

PAGE 1
HDSM-541x/543x 0.56” (14.22mm) Dual digit surface mount LED display Data Sheet Description Features The HDSM-541x/543x is a dual digit display of 0.56” (14.22mm) height. This device utilizes AlInGaP / GaAs chips and has a grey top surface with white segments. x 0.
PAGE 2
Pin Connection (Common Anode) Pin Connection (Common Cathode) PIN No Connection PIN No Connection 1 CATHODE G 1 ANODE G 2 CATHODE DP 2 ANODE DP 3 CATHODE A 3 ANODE A 4 CATHODE F 4 ANODE F 5 COMMON ANODE DIG2 5 COMMON CATHODE DIG2 6 CATHODE D 6 ANODE D 7 CATHODE E 7 ANODE E 8 CATHODE C 8 ANODE C 9 CATHODE B 9 ANODE B COMMON ANODE DIG1 10 COMMON CATHODE DIG 1 10 Internal Circuit Diagram (Common Cathode) Internal Circuit Diagram (Common Anode) A B 3 C 9
PAGE 3
Electrical / Optical Characteristics @ TA=25°C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 5.4 10.5 - mcd IF = 10mA Emissions Wavelength Op/Od - 572/571 - nm IF = 20mA Spectral Line Half-Width 'O - 20 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 Reverse Current, Per Segment IR - Luminous Intensity Matching Ratio IV-M - Parameters Symbol Average Luminous Intensity IV Emissions Wavelength 2.
PAGE 4
Typical Electrical / Optical characteristic curves @ TA=25°C Green G 4 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10MA) RELATIVE LUMINOUS INTENSITY 1.0 . 0.5 0 400 450 500 550 WAVELENGTH(nm) 600 650 Figure 1. Relative Luminous Intensity vs. Wavelength 1 0 5 10 40 30 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 2 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 Figure 2. Relative Luminous Intensity vs.
PAGE 5
Yellow 4 RELATIVE INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE INTENSITY 1.0 0.5 0 400 450 500 550 WAVELENGTH(nm) 600 650 0 5 10 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 40 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 1 Figure 2. Relative Intensity vs. Forward Current 40 30 20 10 0 30 20 10 0 0 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE(°C) Figure 3. Allowable DC Current vs. Ambient Temperature 5 2 0 700 Figure 1. Relative Intensity vs. Wavelength 3 90 100 110 1.
PAGE 6
Red R 4 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE LUMINOUS INTENSITY 1.0 0.5 0 400 500 550 WAVELENGTH(nm) 600 650 0 5 10 40 30 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 1 R 20 10 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 Figure 3. Allowable DC Current vs. Ambient Temperature 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 Figure 2. Relative Luminous Intensity vs. Forward Current 40 6 2 700 Figure 1. Relative Luminous Intensity vs.
PAGE 7
Orange 4 RELATIVE INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE INTENSITY 1.0 0.5 0 450 2 1 0 500 550 600 650 WAVELENGTH(nm) 700 0 750 Figure 1. Relative Intensity vs. Wavelength 5 10 15 20 25 30 FORWARD CURRENT IF(mA) 35 40 45 50 Figure 2. Relative Intensity vs. Forward Current 40 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 40 30 20 10 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 Figure 3. Allowable DC Current vs. Ambient Temperature 7 3 90 100 105 30 20 10 0 1.0 1.
PAGE 8
Intensity Bin Limits (mcd) Yellow / Red / Orange Green IV Bin Category Min. Max IV Bin Category Min. Max M 5.401 8.600 N 8.601 13.700 N 8.601 13.700 P 13.701 21.800 P 13.701 21.800 Q 21.801 34.700 Q 21.801 34.700 R 34.701 55.200 Tolerance: ±15% Tolerance: ±15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins.
PAGE 9
For product information and a complete list of distributors, please go to our web site: 4.0 + −0 0.1 .0 2.4 ± 0.1 Ø1 .5 4 ± 0.1 0.35 Ø2 20.2 ± 0.1 40.4 ± 0.1 44 +0.300 −0.100 1.75 ± 0.1 Tape specification (unit: mm) www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved.