Datasheet

ManualsBrandsBROADCOM ManualsDisplaysSeven-segment display Red 10.16 mm 2.05 V No. of digits: 1

HDSP-311x, HDSP- 313x

10.16 mm (0.4 inch) Single Digit General Purpose

Seven Segment Display

Data Sheet

Description

This 10.16 mm (0.4 inch) LED single digit seven segment

display uses industry standard size package and pinout.

The device is available in either common anode or

common cathode. The choice of colors includes High E -

ciency Red (HER), Green, AlGaAs Red, and Yellow. The gray

face displays are suitable for indoor use.

Applications

 Suitable for indoor use

 Not recommended for industrial application, i.e.,

operating temperature requirements exceeding +85° C

or below -25° C

[1]

 Extreme temperature cycling not recommended

Note:

1. For additional details, please contact your local Avago sales o ce or

an authorized distributor.

Features

 Industry standard size

 Industry standard pinout

– 10.16 mm (0.4 inch) character height

– DIP lead on 2.54 mm

 Choice of colors

– High E ciency Red (HER), Green, AlGaAs Red, and

Yellow

 Excellent appearance

– Evenly lighted segments gray package gives

optimum contrast

– ± 50 ft. viewing angle

 Design  exibility

– Common anode right hand decimal point or

common cathode right hand decimal point

 Categorized for luminous intensity

– Green and yellow categorized for color

Devices

HER Green AlGaAs Red Yellow Description Package Drawing

HDSP-311E HDSP-311G HDSP-311A HDSP-311Y Common Anode Right Hand Decimal A

HDSP-313E HDSP-313G HDSP-313A HDSP-313Y Common Cathode Right Hand Decimal B

Summary of content (11 pages)

PAGE 1
HDSP-311x, HDSP- 313x 10.16 mm (0.4 inch) Single Digit General Purpose Seven Segment Display Data Sheet Description Features This 10.16 mm (0.4 inch) LED single digit seven segment display uses industry standard size package and pinout. The device is available in either common anode or common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. The gray face displays are suitable for indoor use.
PAGE 2
Part Numbering System 5082 - x xx x - x x x xx HDSP - x xx x - x x x xx Mechanical Options [1] 00: No Mechanical Option Color Bin Options [1,2] 0: No Color Bin Limitation Maximum Intensity Bin [1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color [1] A: AlGaAs Red E: High Efficiency Red G: Green Y: Yellow Device Specific Configuration [1] Refer to Respective Datasheet Package [1] Refer to Respective Datasheet Notes:
PAGE 3
Package Dimensions Package Drawing A TOP END VIEW FRONT VIEW COUNTRY OF ORIGIN 8° PIN 1 5.51 (0.220) COLOR BINNING (NOTE 3) 0.50 (0.020) 18.75 (0.738) HDSP-XXXX YWW XZ COO + 10.16 (0.400) 1.20 (0.047) 1.4 (0.55) 2.54 x 6 (0.100) LUMINOUS INTENSITY CATEGORY 4.10 (0.161) DATE CODE 5.54 (0.218) SIDE VIEW 9.80 (0.386) A 0.60 (0.020) F G E 5.10 (0.201) B C D DP 0.30 (0.012) 7.62 (0.
PAGE 4
Package Dimensions Package Drawing B FRONT VIEW RIGHT SIDE COUNTRY OF ORIGIN 6.00 (0.236) LUMINOUS INTENSITY CATEGORY 10.00° COLOR BIN 2.54 ± 0.38 (0.100) 10.00 (0.394) 1.85 (0.073) 1.20 (0.047) HDSP-XXXX YWW XZ COO 0.90 (0.035) 12.80 ± 0.25 (0.504) 4 x 2.54 (0.400) 0.50 ± 0.05 (0.02) 6.40 ± 0.25 (0.252) 7.00 ± 0.25 (0.276) TOP SIDE DATE CODE 10.40 MIN. (0.409) 9.70 ± 0.25 (0.382) A 3.90 (0.153) F G E B C D DP 0.30 ± 0.05 (0.012) 7.62 ± 0.38 (0.
PAGE 5
Internal Circuit Diagram COMMON ANODE RIGHT HAND DECIMAL HDSP-311E/311G/311Y/311A 3.14 COM A 1 B 13 C 10 D 8 E 7 F 2 G 11 DP 9 PIN No. CONNECTION 1 CATHODE A 2 CATHODE F 3 COMMON ANODE 7 CATHODE E 8 CATHODE D 9 CATHODE DP 10 CATHODE C 11 CATHODE G 13 CATHODE B 14 COMMON ANODE PINS 4, 5, 6, 12: NO PIN COMMON CATHODE RIGHT HAND DECIMAL HDSP-313E/313G/313Y/313A 3.8 COM A 10 5 B 9 C 7 D 5 E 4 F 2 G 1 DP 6 PIN NO.
PAGE 6
Absolute Maximum Ratings at TA = 25° C Description HER HDSP-31xE Green HDSP-31xG AlGaAs Red HDSP-31xA Yellow HDSP-31xY Power Dissipation Segment 65 65 30 52 mW Forward Current Segment 25 [1] 25 [2] 15 [3] 20 [4] mA Peak Forward Current per Segment (1/10 Duty Factor at 10 kHz) 100 100 80 80 mA Operating Temperature Range -35 to +85 -35 to +85 -35 to +85 -35 to +85 °C Storage Temperature Range -35 to +85 -35 to +85 -35 to +85 -35 to +85 °C Reverse Voltage per Segment or DP
PAGE 7
AlGaAs Red Device HDSP311A 313A Parameter Symbol Luminous Intensity/Segment IV Min. Typ. Max. 4.54 3.20 Units Test Conditions mcd IF = 5 mA IF = 10 mA 7.50 Forward Voltage VF 1.85 2.00 V Peak Wavelength PEAK 660 nm Dominant Wavelength d 643 nm Reverse Voltage VR 5 Parameter Symbol Min. Luminous Intensity/Segment IV Forward Voltage VF 2.
PAGE 8
30 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA High Efficiency Red (HER) HIGH EFFICIENCY RED (HER) 25 20 15 10 5 0 0 20 40 60 80 TA – AMBIENT TEMPERATURE – °C 120 100 80 60 40 20 100 Figure 1. Maximum allowable average or DC current vs. ambient temperature. RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 0.5 1.0 1.5 2.0 2.5 VF – FORWARD VOLTAGE – V 3.0 3.5 1.4 2.0 1.5 1.0 0.
PAGE 9
30 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA Green GAP GREEN 25 20 15 10 5 0 0 20 40 60 80 TA – AMBIENT TEMPERATURE – °C 80 60 40 20 0 0 3.0 1.2 2.5 1.0 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 7. Relative luminous intensity vs. DC forward current. 0.5 1.0 1.5 2.0 2.5 VF – FORWARD VOLTAGE – V 3.0 3.5 Figure 6. Forward current vs. forward voltage.
PAGE 10
16 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA AlGaAs Red AIGaAs RED 14 12 10 8 6 4 2 0 0 20 40 60 80 TA – AMBIENT TEMPERATURE – °C 80 60 40 20 0 0 3.0 1.2 2.5 1.0 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 11. Relative luminous intensity vs. DC forward current. 0.5 1.0 1.5 VF – FORWARD VOLTAGE – V 2.0 2.5 Figure 10. Forward current vs. forward voltage.
PAGE 11
25 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA Yellow YELLOW 20 15 10 5 0 0 20 40 60 80 TA – AMBIENT TEMPERATURE – °C 100 80 60 40 20 100 Figure 13. Maximum allowable average or DC current vs. ambient temperature. 0 0 3.5 1.4 3.0 1.2 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 15. Relative luminous intensity vs. DC forward current. 0.5 1.0 1.5 2.0 2.5 VF – FORWARD VOLTAGE – V 3.0 3.5 Figure 14.