Datasheet

6
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
2200 7000 Pcd I
F
= 100 mA Peak:
Luminous Intensity/Segment
[1,2]
I
V
1 of 5 df
(Digit Average)
3400 Pcd I
F
= 20 mA
Forward Voltage/Segment or DP V
F
2.6 3.5 V I
F
= 100 mA
HDSP- Peak Wavelength O
PEAK
583 nm
420x Dominant Wavelength
[3,6]
O
d
581.5 586 592.5 nm
Reverse Voltage/Segment or DP
[4]
V
R
3.0 25.0 V I
R
= 100 PA
Temperature Coecient of 'V
F
/°C -2 mV/°C
V
F
/Segment or DP
Thermal Resistance LED Junction- RT
J-PIN
375 °C/W/
to-Pin Seg
Yellow
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
680 1500 P cd I
F
= 10 mA
Luminous Intensity/Segment
[1,2]
I
V
(Digit Average)` 1960 Pcd I
F
= 50 mA Peak:
1 of 5 df
Forward Voltage/Segment or DP V
F
2.1 2.5 V I
F
= 10 mA
HDSP- Peak Wavelength O
PEAK
566 nm
860x Dominant Wavelength
[3,6]
O
d
571 577 nm
Reverse Voltage/Segment or DP
[4]
V
R
3.0 50.0 V I
R
= 100 PA
Temperature Coecient of 'V
F
/°C -2 mV/°C
V
F
/Segment or DP
Thermal Resistance LED Junction- RT
J-PIN
375 °C/W/
to-Pin Seg
Green
Notes:
1. Case temperature of the device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which denes the color of the
device.
4. Typical specication for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs Red HDSP-N100 series displays are recommended. They are tested at 1 mA dc/segment and are pin for
pin compatible with the HDSP-N150 series.
6. The Yellow (HDSP-420x) and Green (HDSP-860x) displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.