Datasheet

5
Electrical/Optical Characteristics at T
A
= 25°C
Notes:
1. See Figure 1 to establish pulsed conditions.
2. Derate above 46°C at 0.54 mA/°C.
3. See Figure 6 to establish pulsed conditions.
4. Derate above 53°C at 0.45 mA/°C.
5. See Figure 7 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C.
7. See Figure 8 to establish pulsed conditions.
8. Derate above 39°C at 0.37 mA/°C.
9. For operation below -20°C, contact your local Avago
components sales office or an authorized distributor.
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment
[1,2,5]
I
V
7.5 15.0 mcd I
F
= 20 mA
(Digit Average)
Forward Voltage/Segment or DP V
F
1.8 2.2 V I
F
= 20 mA
HDSP- Peak Wavelength λ
PEAK
645 nm
F15x/
F16x/ Dominant Wavelength
[3]
λ
d
637 nm
G15x
Reverse Voltage/Segment or DP
[4]
V
R
3.0 15 V I
R
= 100 µA
Temperature Coefficient of ∆V
F
/°C-2 mV/°C
V
F
/Segment or DP
Thermal Resistance LED Rθ
J-PIN
320 °C/W/Seg
Junction-to-Pin
AlGaAs Red
Absolute Maximum Ratings
AlGaAs Red HER/Orange Yellow Green
HDSP- HDSP- HDSP- HDSP-
F15x/F16x F20x/G20x/ F30x/G30x F50x/G50x
Description G15x Series G40x Series Series Series Units
Average Power per Segment or DP 96 105 80 105 mW
Peak Forward Current per 160
[1]
90
[3]
60
[5]
90
[7]
mA
Segment or DP
DC Forward Current per Segment 40
[2]
30
[4]
20
[6]
30
[8]
mA
or DP
Operating Temperature Range –20 to +100
[9]
–40 to +100 °C
Storage Temperature Range –55 to +100 °C
Reverse Voltage per Segment or DP 3.0 V
Wavesoldering Temperature for 250 °C
3 Seconds (1.59 mm [0.063 in.]
below body)