Datasheet

7
Yellow
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment
[1,2]
290 800 µcd I
F
= 5 mA
(Digit Average) I
V
Forward Voltage/Segment or DP V
F
2.2 2.5 V I
F
= 20 mA
HDSP- Peak Wavelength λ
PEAK
583 nm
F30x/
G30x Dominant Wavelength
[3,6]
λ
d
581.5 586 592.5 nm
Reverse Voltage/Segment or DP
[4]
V
R
3.0 40 V I
R
= 100 µA
Temperature Coefficient of ∆V
F
/°C-2 mV/°C
V
F
/Segment or DP
Thermal Resistance LED Rθ
J-PIN
320 °C/W/Seg
Junction-to-Pin
High Performance Green
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λ
d
, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of
the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-F10X, G10X series displays are recommended. They are tested at 1 mA
dc/segment and are pin for pin compatible with the HDSP-F15X/F16x/G15X series.
6. The Yellow (HDSP-F30X/G30X) series and Green (HDSP-F50X/G50X) series displays are categorized for dominant wavelength. The
category is designated by a number adjacent to the luminous intensity category letter.
Device Test
Series Parameter Symbol Min. Typ. Max. Units Conditions
Luminous Intensity/Segment
[1,2]
I
V
1030 3500 µcd I
F
= 10 mA
(Digit Average)
Forward Voltage/Segment or DP V
F
2.1 2.5 V I
F
= 10 mA
HDSP- Peak Wavelength λ
PEAK
566 nm
F50x/
G50x Dominant Wavelength
[3,6]
λ
d
571 577 nm
Reverse Voltage/Segment or DP
[4]
V
R
3.0 50 V I
R
= 100 µA
Temperature Coefficient of ∆V
F
/°C-2 mV/°C
V
F
/Segment or DP
Thermal Resistance LED Rθ
J-PIN
320 °C/W/Seg
Junction-to-Pin
Electrical/Optical Characteristics at T
A
= 25°C, continued