Datasheet

HLMP-0103
T-1
3
/
4
(5 mm) Panel Mount Clip and Retaining Ring
Product Overview
Description
The HLMP-0103 is a black plastic mounting clip and
retaining ring. It is designed to panel mount Agilent Solid
State high prole T-13/4 size lamps. This clip and ring
combination is intended for installation in instrument
panels from 1.52 mm (0.060”) to 2.67 mm (0.105”) thick.
For panels greater than 2.67 mm (0.105”), counterboring
may be needed to the required thickness.
Mounting Instructions
Drill a 6.45/6.63 (0.254/0.261in.) dia. hole in the panel.
Deburr but do not chamfer the edges of the hole.
Press the panel clip into the hole from the front of the
panel.
Press the LED into the clip from the back. Use blunt long
nose pliers to push on the LED. Do not use force on the
LED leads. A tool such as a nut driver may be used to
press on the clip.
Slip a plastic retaining ring onto the back of the clip and
press tight using tools such as two nut drivers.
Note: Clip and retaining ring are also available for T-1
package, from a non-Agilent source. Please contact Inter-
consal Association, 2584 Wyandotte Way, Mountain View,
CA for additional information. Telephone: [phone].
See Diagram that follows.
Package Dimensions
0.110
2.79
0.038±0.003
0.97±0.08
0.022±0.001
0.56±0.03
0.005±0.003
0.13±0.08
6.73
0.290±0.010
7.37±0.25
0.250±0.005
6.35±0.13
0.318
8.08
0.065
1.65
2.03
0.240
6.10
4.57
9.53
0.151±0.005
0.238
0.220±0.010
5.59±0.25
0.265
+0.010-
6.73
+0.25-
3.84±0.13
0.265
120
o
TYP. 6X
6.05
Ø
0.080
TYP. 6X
Ø
0.025
+0.005-0.010
0.64
+0.13-0.25
TYP. 4X
0.180
TYP. 4X
Ø
Ø
Ø
Ø
Ø
0.375
Ø
NOTE:�
ALL DIMENSIONS ARE IN INCHES
(MILLIMETERS).
0.200+0.0040
5.08+0.100