Datasheet

3
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. An epoxy meniscus may extend about 1 mm (0.40") down the leads.
3. For PCB hole recommendations, see the Precautions section.
PACKAGE OUTLINE "A"
HLMP-3750/3850/3950
PACKAGE OUTLINE "B"
HLMP-3390/3490/3590
PACKAGE OUTLINE "C"
HLMP-1340/1440/1540
6.1 (0.240)
5.6 (0.220)
23.0
(0.90)
MIN.
0.46 (0.018)
SQUARE NOMINAL
2.54 (0.100)
NOM.
CATHODE
1.27 (0.050)
NOM.
0.89 (0.035)
0.64 (0.025)
9.19 (0.362)
8.43 (0.332)
12.44 (0.490)
11.68 (0.460)
1.32 (0.052)
1.02 (0.040)
5.08 (0.200)
4.57 (0.180)
0.65 (0.026) max.
24.1 (.95) min.
4.70 (.185)
4.19 (.165)
3.43 (.135)
2.92 (.115)
1.52 (.060)
1.02 (.040)
2.79 (.110)
2.29 (.090)
1.14 (.045)
0.51 (.020)
(0.022) 0.55
SQ. TYP.
(0.016) 0.40
Ø
3.17 (.125)
2.67 (.105)
6.35 (.250)
5.58 (.220)
25.40
(1.00)
MIN.
6.10 (0.240)
5.59 (0.220)
2.54 (0.100)
NOM.
9.19 (0.362)
8.43 (0.332)
5.08 (0.200)
4.57 (0.180)
CATHODE
LEAD
(NOTE 1)
0.89 (0.035)
0.64 (0.025)
1.27 (0.050)
NOM.
0.65
MAX.
0.46 (0.018)
SQUARE
NOM.
PACKAGE OUTLINE "D"
HLMP-3914
PACKAGE OUTLINE "E"
HLMP-3960
23.0
(0.900)
MIN.
6.10 (0.240)
5.60 (0.220)
9.07 (0.357)
8.56 (0.337)
5.08 (0.200)
4.78 (0.188)
0.89 (0.035)
0.64 (0.025)
1.52 (0.060)
1.02 (0.040)
0.53 (0.021)
0.43 (0.017)
13.11 (0.516)
12.34 (0.486)
1.02 (0.040) MAX.
EPOXY
MENISCUS
CATHODE
FLAT
PACKAGE OUTLINE "F"
HLMP-3707/3907
SQ.
2.79 (0.110)
2.29 (0.090)
1.32 (0.052)
1.02 (0.040)
(0.026)
12.47 (0.491)
11.71 (0.461)
22.86 (0.900)
MIN.
1.02 (0.040)
MAX.
Ø
0.46 (0.018)
SQUARE NOMINAL
CATHODE
FLAT
0.65 (0.026) MAX.
2.54 (0.100)
NOM.
9.07 (0.357)
8.56 (0.337)
5.08 (0.200)
4.78 (0.188)
0.89 (0.035)
0.64 (0.025)
1.52 (0.060)
1.02 (0.040)
6.10 (0.240)
5.60 (0.220)
0.46 (0.018)
SQUARE NOMINAL