Datasheet

ManualsBrandsBroadcom ManualsLEDsLED 517nm Green 5 mm T-1 3/4

HLMP-CBxx, HLMP-CMxx

T-1¾ (5 mm) InGaN Blue and Green LEDs

Data Sheet

Description

This high intensity blue and green LEDs are based on the

most ecient and cost eective InGaN material technol-

ogy.

These LED lamps are untinted and non-diused T-1¾

packages incorporating second generation optics

producing well dened spatial radiation patterns at

specic viewing cone angles.

These lamps are made with an advanced optical grade

epoxy oering superior high temperature and high

moisture resistance performance in outdoor signal and

sign application. The epoxy contains uv inhibitor to reduce

the eects of long term exposure to direct sunlight.

Features

• Viewing angle: 15°, 23° and 30°

• Well dened spatial radiation pattern

• High luminous output

• Available in Blue and Green

– Blue 470 nm

– Green 525 nm

• Superior resistance to moisture

• Stando and non-stando Package

Applications

• Trac signs

• Variable Message Sign

• Commercial outdoor advertising

CAUTION: INGaN devices are Class 1C HBM ESD sensitive per JEDEC Standard. Please observe appropriate

precautions during handling and processing. Refer to Application Note AN–1142 for additional details.

Summary of content (11 pages)

PAGE 1
HLMP-CBxx, HLMP-CMxx T-1¾ (5 mm) InGaN Blue and Green LEDs Data Sheet Description Features This high intensity blue and green LEDs are based on the most efficient and cost effective InGaN material technology. • Viewing angle: 15°, 23° and 30° These LED lamps are untinted and non-diffused T-1¾ packages incorporating second generation optics producing well defined spatial radiation patterns at specific viewing cone angles.
PAGE 2
Package Dimensions Drawing A (Non-standoff) 1.00 ± 0.20 0.039 ± 0.008 8.70 ± 0.20 0.343 ± 0.008 0.70 max 0.028 5.00 ± 0.20 0.197 ± 0.008 5.80 ± 0.20 0.228 ± 0.008 0.50 ± 0.10 sq. typ. 0.020 ± 0.004 2.54 ± 0.38 0.100 ± 0.015 31.60 min 1.244 Cathode 1.00 min 0.039 cathode flat Drawing B (Standoff) 8.70 ± 0.20 0.343 ± 0.008 1.00 ± 0.20 0.039 ± 0.008 1.30 ± 0.15 0.051 ± 0.006 0.70 max 0.028 5.00 ± 0.20 0.197 ± 0.008 0.50 ± 0.10 sq. typ. 0.020 ± 0.004 5.80 ± 0.20 0.228 ± 0.008 2.54 ± 0.38 0.
PAGE 3
Device Selection Guide Luminous Intensity Iv (mcd) at 20 mA [1,2,5] Part Number Color and Dominant Wavelength λd (nm) Typ [3] Min Max Standoff Typical Viewing angle (°) [4] HLMP-CB1G-WY0DD Blue 470 5500 12000 No 15 HLMP-CB1H-WY0DD Blue 470 5500 12000 Yes HLMP-CM1G-350DD Green 525 27000 59000 No HLMP-CM1H-350DD Green 525 27000 59000 Yes HLMP-CB2G-UW0DD Blue 470 3200 7200 No HLMP-CB2H-UW0DD Blue 470 3200 7200 Yes HLMP-CM2G-130DD Green 525 16000 35000 No HLMP-CM2H-130
PAGE 4
Absolute Maximum Ratings TJ = 25° C Parameter Blue/Green Unit DC Forward Current [1] 30 mA Peak Forward Current 100 [2] mA Power Dissipation 110 mW LED Junction Temperature 110 °C Operating Temperature Range -40 to +85 °C Storage Temperature Range -40 to +100 °C Notes: 1. Derate linearly as shown in Figure 4. 2. Duty Factor 10%, frequency 1 kHz. Electrical / Optical Characteristics TJ = 25° C Parameter Symbol Min. Typ. Max.
PAGE 5
25 Blue Green FORWARD CURRENT - mA RELATIVE INTENSITY 30 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 430 480 530 WAVELENGTH - nm Figure 1. Relative Intensity vs Wavelength 580 630 1.2 1 0.8 0.6 0.4 0.2 0 10 15 20 DC FORWARD CURRENT - mA Figure 3. Relative Intensity vs Forward Current 5 25 30 10 8 6 Green 4 2 Blue 0 -2 -4 0 5 30 5 0 1 3 4 35 30 25 20 15 10 5 0 40 60 80 TA - AMBIENT TEMPERATURE - C Figure 4.
PAGE 6
NORMALIZED INTENSITY NORMALIZED INTENSITY 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 Figure 7. Representative Radiation pattern for 23° Viewing Angle Lamp FORWARD VOLTAGE SHIFT - V RELATIVE LIGHT OUTPUT (NORMALZIED @ TJ = 25° C) -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 0.3 BLUE GREEN 1 -40 -20 0 20 40 60 80 TJ - JUNCTION TEMPERATURE Figure 9. Relative Light Output vs Junction Temperature 6 -90 Figure 8.
PAGE 7
Intensity Bin Limit Table (1.3 : 1 Iv Bin Ratio) Blue Color Bin Table Intensity (mcd) at 20 mA Bin Min Max Min Bin Dom T 2500 3200 1 U 3200 4200 V 4200 5500 W 5500 7200 X 7200 9300 Y 9300 12000 Z 12000 16000 1 16000 21000 2 21000 27000 3 27000 35000 4 35000 45000 5 45000 59000 460.0 Max Dom Xmin Ymin Xmax Ymax 464.0 0.1440 0.0297 0.1766 0.0966 0.1818 0.0904 0.1374 0.0374 0.1374 0.0374 0.1699 0.1062 0.1766 0.0966 0.1291 0.0495 0.1291 0.
PAGE 8
Precautions: Lead Forming: • The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering on PC board. • For better control, it is recommended to use proper tool to precisely form and cut the leads to applicable length rather than doing it manually. • If manual lead cutting is necessary, cut the leads after the soldering process. The solder connection forms a mechanical ground which prevents mechanical stress due to lead cutting from traveling into LED package.
PAGE 9
Example of Wave Soldering Temperature Profile for TH LED 260°C Max TEMPERATURE (°C) Recommended solder: Sn63 (Leaded solder alloy) SAC305 (Lead free solder alloy) Flux: Rosin flux Solder bath temperature: 255°C ± 5°C (maximum peak temperature = 260°C) 105°C Max Dwell time: 3.0 sec - 5.0 sec (maximum = 5sec) 60 sec Max Note: Allow for board to be sufficiently cooled to room temperature before exerting mechanical force. TIME (sec) Ammo Packs Drawing 6.35 ± 1.30 0.250 ± 0.051 12.70 ± 1.00 0.500 ± 0.
PAGE 10
Packaging Box for Ammo Packs FROM LEFT SIDE OF BOX ADHESIVE TAPE MUST BE FACING UPWARDS. LABEL ON THIS SIDE OF BOX ANODE LEAD LEAVES THE BOX FIRST.
PAGE 11
DeptID: Made In: Country of Origin (ii) Avago Baby Label (Only available on bulk packaging) Lamps Baby Label (1P) PART #: Part Number RoHS Compliant e3 max temp 260C (1T) LOT #: Lot Number (9D)MFG DATE: Manufacturing Date QUANTITY: Packing Quantity C/O: Country of Origin Customer P/N: CAT: Intensity Bin Supplier Code: BIN: Color Bin DATECODE: Date Code DISCLAIMER: Avago’s products and software are not specifically designed, manufactured or authorized for sale as parts, components or assemblies f