Specifications

- 19 -
2ATEV-BL3358-P” or “Contains transmitter module FCC ID: 2ATEV-BL3358-P”.
2.9 Information on test modes and additional testing requirements
Contact Hangzhou BroadLink Technology Co., Ltd. will provide stand-alone modular transmitter
test mode. Additional testing and certification may be necessary when multiple modules are used
in a host.
2.10 Additional testing, Part 15 Subpart B disclaimer
To ensure compliance with all non-transmitter functions the host manufacturer is
responsible for ensuring compliance with the module(s) installed and fully operational. For
example, if a host was previously authorized as an unintentional radiator under the Supplier’s
Declaration of Conformity procedure without a transmitter certified module and a module is
added, the host manufacturer is responsible for ensuring that the after the module is installed
and operational the host continues to be compliant with the Part 15B unintentional radiator
requirements. Since this may depend on the details of how the module is integrated with the
host, Hangzhou BroadLink Technology Co., Ltd.shall provide guidance to the host manufacturer
for compliance with the Part 15B requirements.
Note 1: This module certified that complies with RF exposure requirement under mobile or fixed
condition, this module is to be installed only in mobile or fixed applications.
A separate approval is required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and difference antenna configurations.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Note 2: Any modifications made to the module will void the Grant of Certification, this module is
limited to OEM installation only and must not be sold to end-users, end-user has no manual
instructions to remove or install the device, only software or operating procedure shall be placed
in the end-user operating manual of final products.
Note 3: Additional testing and certification may be necessary when multiple modules are used.
Note 4: The module operated only with the antenna which it is authorized.
The host product shall be properly labelled to identify the modules within the host product.
The ISED certification label of a module shall be clearly visible at all times when installed in the
host product; otherwise, the host product must be labelled to display the ISED certification
number for the module, preceded by the word "contains" or similar wording expressing the same
meaning, as follows:
Contains IC: 25062-BL3358P
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject