Product Manual

- 17 -

that can be easily re-located, such as wireless devices associated with a personal computer, are

considered to be mobile devices if they meet the 20 centimeter separation requirement.

A fixed device is defined as a device is physically secured at one location and is not able to be

easily moved to another location.

Note 2: Any modifications made to the module will void the Grant of Certification, this module is

limited to OEM installation only and must not be sold to end-users, end-user has no manual

instructions to remove or install the device, only software or operating procedure shall be placed

in the end-user operating manual of final products.

Note 3: Additional testing and certification may be necessary when multiple modules are used.

Note 4: The module may be operated only with the antenna with which it is authorized. Any

antenna that is of the same type and of equal or less directional gain as an antenna that is

authorized with the intentional radiator may be marketed with, and used with, that intentional

radiator.

Note 5: To ensure compliance with all non-transmitter functions the host manufacturer is

responsible for ensuring compliance with the module(s) installed and fully operational. For

example, if a host was previously authorized as an unintentional radiator under the Supplier’s

Declaration of Conformity procedure without a transmitter certified module and a module is

added, the host manufacturer is responsible for ensuring that the after the module is installed

and operational the host continues to be compliant with the Part 15B unintentional radiator

requirements. Since this may depend on the details of how the module is integrated with the

host, Hangzhou BroadLink Technology Co., Ltd. shall provide guidance to the host manufacturer

for compliance with the Part 15B requirements.

Note 6: FCC ID label on the final system must be labeled with “Contains FCC ID: 2ATEV-BL3383-P”

or “Contains transmitter module FCC ID: 2ATEV-BL3383-P”.

Note 7: For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for

2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the

end-user regarding to Regulatory Domain change.