User manual

LinkMAX

 HSA300 User Manual
122
20
Viewing System Alarms
You can use the Configuration Manager to view information about
alarms that occur in the system. Alarms, also called traps, are
caused by a variety of system events, including connection
attempts, resets, and configuration changes.
Although you will not typically need to view this information, it may
be helpful in working with your ISP to troubleshoot problems you
encounter with the device. (Despite their name, not all alarms
indicate problems in the functioning of the system.)
Viewing the Alarm Table
To display the Alarm page, log into the Configuration Manager, click
the Admin tab, and then click Alarm in the task bar.
The Alarm page displays, as shown in Figure 64.
Figure 64. Alarm Page
Each row in the table displays the time and date that an alarm
occurred, the type of alarm, and a brief statement indicating its
cause.
To remove all entries from the list, click
. New entries will
begin accumulating and will display when you click
.