User manual

LinkMAX



 HSA300 User Manual

Getting Started with the Configuration

Manager

HSA300 includes preinstalled program called the Configuration

Manager, which provides an interface to the software installed on

the device. It enables you to configure the device settings to meet

the needs of your network. You access it through your web browser

from any PC connected to HSA300 via

the LAN port.

This chapter describes how to use the Configuration Manager.

Note

HSA300 may already be configured to provide Internet connectivity

for your network. If it works properly with the preconfigured settings,

then you may not need to use the Configuration Manager. Contact

your ISP to determine which settings you may need to change, if

any.

Accessing the Configuration Manager

The Configuration Manager program is preinstalled into memory on

HSA300. To access the program, you need the following:

A PC or laptop connected to the LAN port on the device as

described in the Quick Start chapter.

! An web browser installed on the PC. The program is

designed to work best with Microsoft Internet Explorer®

version 5.0, Netscape Navigator® version 4.7, or later

versions.

You can access the program from any computer connected to

HSA300 via the LAN or USB ports.

1. From a LAN computer, open your web browser, type the

following URL in the web address (or location) box, and

press <Enter>:

http://192.168.0.1

Or, from the USB computer, type:

http://192.168.0.2

These are the predefined IP addresses for the LAN and USB

ports on HSA300.

A login screen displays, as shown in Figure 11.