User manual

LinkMAX

 HSA300 User Manual
71
a.
Click the Services tab, and then click DNS in the task bar. The
DNS Configuration page displays.
Figure 36. DNS Configuration Page
b. Type the IP address of the DNS server in an empty row and click
.
You can enter only two addresses.
c.
Click the Enable radio button, and then click
.
3. Click the Admin tab, and then click Commit & Reboot in
the task bar.
4. Click
to save your changes to permanent
memory.
Note
DNS addresses that are assigned to LAN PCs prior to enabling
DNS relay will remain in effect until the PC is rebooted. DNS relay
will only take effect when a PC's DNS address is the LAN IP
address.
Similarly, if after enabling DNS relay, you specify a DNS address
(other than the LAN IP address) in a DHCP pool or statically on a
PC, then that address will be used instead of the DNS relay
address.