User manual

LinkMAX



 HSA300 User Manual

Adding a PPP Interface Definition

If you intend to use more than one type of service from your ISP,

the device may be configured with multiple PPP interfaces, each

with unique logon and other properties. Follow this procedure to

define properties for a PPP interface:

1. From the PPP Configuration Page, click

The PPP Interface – Add page displays, as shown in Figure 46.

Figure 46. PPP Interface – Add Page

2. Select a PPP interface name from the drop-down list, and

then enter or select data for each field.

Note

You can create multiple PPP interfaces only if you are using the

PPoA protocol; only one PPP interface can be define if you are

using PPoE. Check with your ISP which version of the protocol

they require.

The fields are defined in the tables on page 86 and 88.

3. Click

A page displays to confirm your changes.

4. Click

to return to the PPP page and view the new

interface in the table.