Specifications
Table Of Contents
- 最新说明书
- 1.Productoverview
- The HB55_V0.1 is a 2.4GHz 802.11n product. with au
- image sensor interface. with a full 802.11b/g/n au
- for both AP and STA applications.
- 1.1.characteristic
- 1.2.application
- 2.Productspecifications
- 3.2.powerwaste
- 3.3.RFcharacteristics
- 4.Pindefinition
- 6.Referencedesignofexternalantenna
- 8.reflowprofile
- 模块 警告语
Explanation: The module complies with FCC radiofrequency radiation exposure limits for
uncontrolled environments. The device is installed and operated with a distance of more
than 20 cm between the radiator and your body." This module follows FCC statement
design, FCC ID :2A9H6-PETA1
2.7
Antennas
A list of antennas included in the application for certification must be provided
in the instructions. For modular transmitters approved as limited modules, all
applicable professional installer instructions must be included as part of the
information to the host product manufacturer. The antenna list shall also
identify the antenna types (monopole, PIFA, dipole, etc. (note that for example
an “omni-directional antenna” is not considered to be a specific “antenna
type”).
For situations where the host product manufacturer is responsible for an
external connector, for example with an RF pin and antenna trace design, the
integration instructions shall inform the installer that unique antenna connector
must be used on the Part 15 authorized transmitters used in the host product.