User's Manual

18
Device Configuration
4
Device Configuration
After connecting to a selected network, you should configure your PCMCIA card’s
network settings.
1
After connecting to a selected
network, the
Network Blaster
Wireless LAN PCMCIA Card
Utility
dialog box appears
(Figure 4-1). The status of your
wireless connection is displayed.
2
Click the
Monitor
tab.
3
Determine if your wireless
network is operating in Ad-hoc or
Infrastructure mode (see “What Is
Wireless Network?” on page 32).
4
In Ad-hoc mode, click the
Channel
box, and then click the
channel that is the same as your
Ad-hoc network.
In Infrastructure mode, this
setting is disabled.
5
Click the
SSID
box, and then type
the SSID that is the same as your
access point or Ad-hoc network.
For more information on SSID, refer to “Service Set Identity (SSID)” on page
46.
Configuring a Network in Windows 98 SE/Me/2000
Figure 4-1