User's Manual

Setting Up a Serial Connection 4-2
4. Click the Finish button.
5. When prompted to restart your computer, click the No button.
6. Shut down your computer.
For instructions on connecting your modem to your computer, see "Installing
Hardware" on page 4-2.
Installing
Hardware
1. Turn off your computer, and if applicable, disconnect its power adapter from
the power outlet.
2. Set up your modem as shown below, and turn on the modem and computer.
• To turn on your
modem, connect the
power adapter to
the wall outlet and
where necessary,
turn on the mains.
The PWR LED on
your modem lights
up.
• To turn off your
modem, disconnect
the power adapter
from the wall, or
turn off the mains.
Serial
port
Phone jack
Connect a phone set
to the Phone jack.
Telephone Line jack
Connect this to a
telephone line for data
and facsimile
transmissions.
Serial cable
The supplied serial
cable features two
different connector
heads. Choose the
connector head that
is appropriate for the
serial port on your
computer.
Power
adapter
Interface switch
Push this towards
the RS-232 symbol.
Figure 4-2
Computer
Serial
port