User's Manual

Chapter 7 Troubleshooting

Verify the Wireless LAN Card is functioning properly.

After installation you can verify whether you wireless adapter is properly installed and functioning by take out these steps:

1. Launch the Device Manager as below:

• For Windows 98/Me: Under Control Panel, click System > Device Manager.

• For Windows 2000/XP: Under Control Panel, click System > Hardware > Device Manager.

2. In the Device Manager window, double-click Network adapters to display your wireless adapter.

3. Without an exclamation mark next to the wireless adapter, your wireless device is working properly; otherwise you will need to remove and

re-install the WLAN card’s software.

Cannot Install under Windows 2000

When I installing the software under Windows 2000, I received the error message: “1608: Unable to create InstallDriver instance” and the program

stopped installing.

This error occurs when the Microsoft Network Client is not installed under Windows 2000. To install this network component:

1. Go to Control Panel and double-click the Network and Dial-up Connections icon. Right-click on the Local Area Connection, then select

Properties.

2. Click Install > Client > Add > Client for Microsoft Networks > OK.

3. The Microsoft Network Client is now installed. Manually restart your computer to enable the changes.

4. Then re-try to install the software as described in this manual.

Radio Interference

You may be able to attenuate any interference by trying the following:

• Reseat the Wireless LAN Card.

• Increase the distance between the wireless computers and the device causing the radio interference.